Spyderco PM3 Brass – Skulls – NEW Relief Engraving Style – Deep Laser Engraved – Aged Finish – Brass Knife Scales – EDC Gear – Knife Install Optional

Description

We now offer multiple options when you buy one of our PM3 scales:
– Buy the engraved scales only
– Add the Satin Ti hardware kit with the scales to install yourself
– Choose the black blade complete knife with scales installed (comes with original black hardware, you will not receive the original G10 scales)
– Choose the satin blade complete knife with scales installed & Satin Ti hardware kit (you will not receive the original hardware or G10 scales if you select the installed option)

The intricately woven skull pattern with an aged look, over 100 passes for depth to ensure that no detail is missed. Scales are then lightly sanded, treated with an aging solution that protected with a layer of clear coat. Brass scales are engraved using one of our many fiber lasers in the shop.

One of the many things we take pride in is providing engravings that last. These are not Cermark coated and put under a Co2. These engravings will not rub off, but still feels good to the touch. Adds just enough texture to feel good in the hand.

PM3 Brass Handle Scales are custom made scales that are milled from brass to fit the Spyderco Para 3. They are 4.25″ overall and weigh 3.25oz.

There are many small parts and pieces on the Para 3. It is NOT easy to take apart. Disassemble at your own risk. Also keep in mind that almost every knife manufacturer provides a list of specific actions that could void the manufacturer’s warranty.

**Titanium hardware kit includes everything you need to replace all visible hardware on your knife: Pivot Screws, Body Screws, Pocket Clip Screws, Stop Pin, Barrel Spacer, and Lanyard Tube. The only stock piece this kit won’t replace is the pivot barrel – steel performs better than titanium for this part and you definitely want to keep that drop-shut action! This hardware kit weighs about 0.11 oz.

Installation of the hardware kit requires some basic tools and knowledge, the pivot can be tough to remove. Titanium screws require a little finesse as they are not as strong as steel screws, high quality torx bits are recommended to ensure the best experience.

Hardware kits are not made here, these are Flytanium brand, and we are not responsible if you are unable to make them work with your knife. We personally have assembled many kits with no issues, we will not accept returns on hardware kits after you have attempted to install them.

– These DO NOT fit the PM3 lightweight.