Description
Spyderco Standard Wire Clip Replacement Deep Carry Titanium Clip
This clip was designed specifically for Spyderco models that use their wire clip.
Whether or not the clip will work with a specific model depends on where the clip screw is in relation to the ‘channel tines’ (where the clip is held in the scales). If the screw is high in relation to those channels, there isn’t room to get a wrench on to tighten the clip down. If the screw is in the middle or lower area, the clip will work. Please see the compatibility tab for a list of compatible and incompatible models. If your model isn’t listed, please shoot an email and we’ll take a look at your model and get back to you.
They are made here in Washington state from domestic 6AL-4V titanium, and are hand-formed and finished.
Engraved Lynch NW Spyderco Standard Deep Carry Titanium Clip. Proudly made in the USA!
Unlike other clip sellers on ETSY, ours are made right here in the USA! Not bought off Amazon or Alibaba and resold.
Choose from 3 different finishes: Blacksmith, Stonewashed, or Satin
**Satin & Stonewash finish photos are of a stock clip, it will come with the same engraving as pictured on the blacksmith finish.
Deep laser engraving of the lines of a topographic map, the perfect match to our topographic scales. Engraved using one of the many fiber lasers in our shop.
One of the many things we take pride in is providing engravings that last. These engravings will not rub off, but still feels good to the touch. Adds just enough texture to feel good in the hand.
SPECIFICATIONS
Clip Material: Grade 5 6AL-4V Titanium
Clip Length: 2.0″
Clip Screw Hole Measurement (between center of each screw hole): N/A
Clip Screw Hole Diameter: N/A
Note: This clip DOES NOT come with a hardware packet that includes spare screws due to how many different screw sizes wire clip models use. Most Spyderco OEM screws take a T6 or T8 (Torx) tool to remove.
Finishes:
*Important Note: Please keep in mind there is no guarantee that these finishes will match up with your knife’s hardware, scales, or blade. Every effort is made to match popular and common finishes found on compatible knife models.
– Satin – A smooth, lightly sanded titanium finish, that matches up with many satin finished blades on the market.
– Stonewashed – A brighter, more silver color that shows the titanium grain. This is currently our most popular and overall durable finish, that matches many stonewashed blades.
– BlackSmith – A finish that involves blasting the clip, superheating it, and quenching it. The result is a black finish that looks very similar to DLC.
**Maintenance: Some finishes may scratch and mark up easier than others, and will also dull, tarnish or “patina” through contact with skin oils, etc. The finish can be cleaned, buffed, and brightened up by using some Windex and a clean cotton towel.
***NOT FOR DRUG USE!***
Model Compatibility:
Spyderco
WILL FIT
Autonomy 1
Caly 3
Caly 3.5
Chicago
Dragonfly 2
Foundry
Lil Native Compression Lock (will not fit Lockback version)
Manix 2 Lightweight
MicroJimbo
Para 3 Lightweight
Poliwog
Sage 2
Sage 5 CF
Sage 5 Lightweight
Siren
Slysz Bowie (newer versions – will not fit the Gen 1 version)
SpydieChef (newest ‘black screw’ version – will not fit older ‘silver screw’ models)
Squeak
Techno 1
Techno 2 (fits with some effort)
UKPK
Urban
Urban Lightweight
WILL FIT the following models that use a connected screw/barrel setup to hold the clip on the knife. On these models, if the screw and barrel both have drives, you need only to loosen the screw, then tighten it down from the opposite side once the clip is installed. If the screw has a drive, but the barrel side is plain (no drive), the screw and barrel need to be removed (before installation of the new clip), then re-installed with the screw head on the opposite side of the knife. The design of these knives puts the screw too high in relation to the ‘tine channels’ to get a driver through the access hole on the clip and onto the screw when the clip is place. But by flipping the barrel/screw around, it works well, as the clip can be tightened from the opposite side.
Chaparral CF
Chaparral FRN
Ikuchi
Kapara
PITS
UKPK FRN
BladeHQ
Vox Dapper
Divo Knives
Stout
Fox Knives
Black Bird
Core
Baby Core
Italico
MKM
Pelican Liner Lock
Giant Mouse Knives
Ace Riv Titanium
Ace Riv Brass
Ace Riv Micarta
Ace Clyde Brass
Ave Clyde Micarta
Ace Sonoma Micarta
Kabar
Dozier
Luft Concepts
AVNT
Micro Burst
MKM
Isonzo
North Arms
Skaha II
Renegade Provisions Co.
Gungnir (Wire Clip Model)
Vosteed
Thunderbird
Quiet Carry
Drift G10
Reviews
There are no reviews yet.