Spyderco PM2 Copper – Kraken Pirate Ship 3.0 – Deep Laser Engraved Copper Knife Scales – EDC Gear – Hardware & Knife Install Options

Description

We now offer multiple options when you buy one of our PM2 scales:
– Buy the engraved scales only
– Add the Ti hardware kit with the scales to install yourself
– Choose the black blade complete knife with scales installed (comes with original black hardware, you will not receive the original G10 scales)
– Choose the satin blade complete knife with scales installed & Ti hardware kit (you will not receive the original hardware or G10 scales if you select the installed option)

DEEP ENGRAVED New version of the Kraken vs Pirate Ship design using our 100w MOPA fiber laser, these are not Cermark coated and put under a Co2. These engravings will not rub off, but still feels good to the touch. Adds just enough texture to feel good in the hand.

Flytanium precision milled for Spyderco paramilitary 2. Antique stonewash finish copper construction. They are 4.75” overall and weigh 3.67oz. No hardware to tools are included, must use original hardware for assembly.

One of the many things we take pride in is providing engravings that last. These engravings will not rub off, but still feels good to the touch. Adds just enough texture to feel good in the hand.

Measurements:

• 4.75″ Overall
• 1/8″ Thick
• 3.67oz

There are many small parts and pieces on the Para 2. It is NOT easy to take apart. Disassemble at your own risk. Also keep in mind that almost every knife manufacturer provides a list of specific actions that could void the manufacturer’s warranty.

**Both Black and Satin blade options are made with CPM S45VM blade steel.

**Titanium Hardware kit includes everything you need to replace all visible hardware on your PM2: Pivot Screws, Body Screws, Pocket Clip Screws, Threaded Stop Barrel, Barrel Spacer, and Lanyard Tube. Kit will not include a pivot barrel replacement.

Installation of the hardware kit requires some basic tools and knowledge, the pivot can be tough to remove. Titanium screws require a little finesse as they are not as strong as steel screws, high quality torx bits are recommended to ensure the best experience.

Hardware kits are not made here, these are Flytanium brand, and we are not responsible if you are unable to properly install them on your knife. We personally have assembled many kits with no issues, we will not accept returns on hardware kits after you have attempted to install them.

*Please Note: Spyderco’s Warranty does not cover disassembly of any knife by any person other than Spyderco’s Warranty department.